ISSN: 2995-7737
Volume 11, Number 1 (2026)
Year Launched: 2016
Journal Menu
■ Archive
Previous Issues
SCIREA Journal of Energy (ISSN: 2995-7737)
SCIREA Journal of Energy is an international, scientific peer-reviewed open access journal published online by SCIREA.
Archiving
Volume 11, Issue 1, February 2026
Abstract: This paper presents a comprehensive inventory of the potential for green hydrogen production derived from the Archimedean small hydropower resources of Greece. The assessment is based on hydrological and geographical data from the country’s 14 Water Districts and adopts a holistic methodology to estimate the total theoretic
Volume 10, Issue 1, February 2025
Abstract: Climate change and global warming have been attributed to, among other things, a high consumption of fossil fuels which has led to severe environmental problems. Sustainable marketing practices is increasingly being viewed as part of the solution especially when it comes to the energy sector, given the significant environme
Abstract: Solar still, while cost-effective and energy-efficient, often face limitations in productivity that hinder its usability in fresh water supply. Several performance enhancement methods for solar stills are explored in this study through different modifications. Three configurations were examined: a conventional double slope
Abstract: Urban wastewater treatment plants (WWTPs) constitute a material share of municipal greenhouse-gas footprints, yet management-level mitigation is obscured by static emission-factor inventories and scarce plant-cluster data. We assemble a two-year panel for twelve WWTPs in a middle Chinese city and integrate three components
Volume 9, Issue 1, February 2024
Abstract: In the process of deep shale gas horizontal well drilling, rotary guidance tools not only adjust the borehole trajectory, but also transmit downhole geological and engineering data transmission. These advantages provide convenience for deep shale gas development, however, when the wellbore temperature exceeds 135°C, it is e
Volume 8, Issue 2, April 2023
Abstract: Cyclodextrins are widely used in medicine, daily chemicals and other fields, because of its special physical and chemical properties and excellent biological characteristics, but due to the limitation of poor solubility, various modification methods have become a research hotspot for scientific researchers. In this paper, p
Volume 8, Issue 1, February 2023
Abstract: The article describes the most common schematic diagrams of electro-hydraulic control systems for steam turbines. The main advantages and disadvantages of these schemes are given. It is noted that for the modernization of steam turbines in operation, the cheapest and most effective is the choice of electro-hydraulic systems
Abstract: The design of an Improved Hybrid Solar Wind Turbine (IHSWT) is described in which solar and wind are combined and converted into a single energy source. It consists of installing solar panels on the south- facing façade of the wind turbine tower. To capture maximum sunlight, the solar panels below the turbine blade, are mou
Volume 7, Issue 2, April 2022
Mechanistic consideration for the thermal degradation of polymers based on continuous flow operation
Abstract: In this study, the author investigated the validity of the radical transfer mechanism for thermal degradation of polymers based on experimental facts and macroscopic considerations. There are various insufficiencies in the radical transfer mechanism which cannot provide any mechanistic explanation, such as the existence of
Volume 7, Issue 1, February 2022
Abstract: In this study the author investigated the effect of non-acidic porous solid (silicalite) on the thermal degradation behavior of polypropylene and polystyrene, and found that silicalite affects the thermal degradation behavior of polypropylene and polystyrene as well as polyethylene, respectively. And for comparison with sil
Volume 6, Issue 6, December 2021
Abstract: To improve the overall energy production from the wind turbine and lower the levelized cost of energy (LCOE), an innovative approach for the design of a hybrid solar-wind turbine (HSWT) is proposed. The present concept is based on installing arrays of solar panels on the south-facing facade of the turbine tower to generate
Abstract: Field "X" one of the oil and gas fields was have 3 operating wells. The daily production of oil and gas up to April 27, 2019, was 215 BOPD and gas was 0.15 MMSCFD, where previously the produced gas was discharged by flare and oil was flowed directly to the collecting station. The problem with this research is that the origi
Volume 6, Issue 5, October 2021
Abstract: Understanding polymer flow behaviour in porous media is essential to know the performance of polymer injection on oil recovery factor enhancement that is affected by various parameters. This research work conducted a series of waterflooding and polymer injection processes on acrylic or polymethyl methacrylate (PMMA) micromo
Volume 6, Issue 4, August 2021
Abstract: Thermoelectric generator (TEG) for power generation system is proposed for energy recovery. The heat from cooling scramjet would be converted to electric energy. A parametric study of TEGs power generation system for heat recovery has been performed. The output power, the efficiency and the fuel flow saving ratio of the sys
Volume 6, Issue 3, June 2021
Abstract: The general scheme of heat-to-electric power conversion in closed thermally inhomogeneous heterogeneous flow with constantly renewable local imbalance is considered. Conversion system comprises high-speed motor-generator rigidly coupled with propulsor. Propulsor has the form of rotating vessel containing liquid phase of wor
Volume 6, Issue 2, April 2021
Abstract: The failure of some concepts taken roots in thermodynamics is established. The Second Law of thermodynamics is true only for all single-parameter or for fully integrated multi-parameter systems. The concept of entropy of a non-integrated system is illusory one.
Volume 6, Issue 1, February 2021
Abstract: In this paper, the predictive current control is applied to the matrix converter-based novel power electronic transformer(MC-NPET). In order to control the output voltage, PI control is added. The proposed method aims to regulate the output voltage of the novel power electronic transformer and correct the input power factor
Abstract: Gas turbine engine are one of the major prime movers used in industry and aviation to produce energy and power. However, a major limitation of gas turbine engines, in relation to climate change, is that they are mostly powered by fossil fuels which when burnt, release emissions in varying amounts into the atmosphere. Growin
Volume 5, Issue 2, April 2020
Abstract: Relevant to the activation of solid fuel particles, critical condition for the mass burning rate constant, above which particle combustion can successfully be accomplished has been obtained. Use has been made of the asymptotics, with focusing on the temporal variation of the particle temperature in the plateau stage. It h
Volume 5, Issue 1, February 2020
Abstract: The economic climate for any process, product or industry isinfluenced by numerous variables. Any organisation willing tothrive must make deliberate effort to adequately understand theinteractions between the elements, factors and variablesinfluencing its economic climate. Economic analysis is a toolwhich determines how eff
Volume 4, Issue 4, August 2019
Abstract: The precise control of the annulus pressure involves the problems of drilling safety and drilling cost, which have always been the focus of drilling engineering. In this paper, combined with the characteristics of the riserless mud recovery (RMR) system, the calculation method of equivalent circulating density (ECD) and ann
Volume 4, Issue 3, June 2019
Abstract: This work is oriented to fulfil the cooling or heating demand of building space using ground renewable energy to get the independency on conventional energy. In this paper, EATHE (Earth Air Tunnel Heat Exchanger) simulated model has been developed using ANSYS Fluent. The grid independency study has been done for CFD model a
Abstract: Abstract The study was carried out to produce biogas from cow dung and poultry wastes. The study was also carried out to determine the heat efficiency of each of the biogas produced. Nineteen litre bio-digesters and gas collection systems were fabricated using locally available materials. The respective organic materials us
Volume 4, Issue 2, April 2019
Abstract: Polymer flooding of heavy oil proves successful in China offshore heterogeneous reservoir, how to improve polymer flooding efficiency is a critical challenge in economically field application of heavy oil polymer flooding. Field results show that single slug polymer injection can lead to profile reversion, excessive polymer
Volume 4, Issue 1, February 2019
Abstract: The stick-slip vibration in deep hard formation is a technical bottleneck restricting the efficient use of PDC bit.In order to combat the stick-slip phenomenon during drilling in deep hard formations, we introduced thehigh frequency self-excited torkbuster. Based on the analysis of the working principle of the torkbuster, a
Volume 3, Issue 1, February 2018
Abstract: The quest for new renewable energy resources is intensifying, with a view to greenhouse gas emission reduction and in the context of the climate-food-water-energy nexus. A hitherto ignored though widely available renewable energy resource lies in downstream water flow exiting from existent hydroelectric power plant. The tec
Volume 2, Issue 2, April 2017
Abstract: The purpose of the present paper has been undertaken with a view to evaluate the ICT skills of students amongst the College Library Users of Federal Polytechnic, Offa, Kwara State. So far, economic research has failed to provide a clear consensus on the level of ICT literacy skills of student’s in Polytechnics and how it af
Abstract: Phase-by-phase Post-remediation exercise of Duza twin village was conducted to determine the success of remediation carried out by Environmental Emergency Response Mission. Present phase in this report boarders on the children playground and the village market. Ten samples from playing grounds around the village market and
Volume 2, Issue 1, February 2017
Abstract: Many different processes are used to treat raw natural gas to pipeline quality. Sulfur is commonly present as an impurity in fossil fuels. Magnetic field is applied in a fluidized bed which contains nano activated carbon to investigate hydrogen sulfide elimination. Sulfur removal in this way is presented experimentally and
Volume 1, Issue 2, December 2016
Abstract: The effect of POCl3 bubbler temperature on silicon n+/p solar cells emitter characteristics is investigated in this paper. By increasing the bubbler temperature, calculations and secondary ion mass spectroscopy characterization showed that the amount of phosphorus entering the diffusion tube has significantly increased. O
Abstract: In the last decade biofuel production has been increasing dramatically. Recently several countries have introduced mandates and targets for biofuel expansion. This paper revisits the recent developments in biofuel production and its impact on the harvested area and CO2 emissions for producers and rest of the world. Three de
Abstract: This study investigated the impacts of biodiesel produced from oilseeds on global CO2 emissions as well as oilseeds harvested area and yields. Three scenarios were defined: first scenario evaluated the effect of percent changes in the U.S. biodiesel production by 2011 based on 2001. The second one addressed the same impacts
Volume 1, Issue 1, October 2016
Abstract: Polysiloxane@phenolic resin (Polysiloxane@RF) precursor is firstly synthesized by sol-gel method using resorcinol, formaldehyde and triethoxyethylsilanes as starting materials, and then pyrolyzed at a desired temperature for desired time. The as-prepared SiOx@C samples are characterized by Fourier transform infrared spectro
Abstract: A two-stage model for optimizing planning of distribution system with the presence of DG is presented in this paper. The proposed model can determine optimal upgrading sizing and timeframe of equipments (feeders and transformer substations) in distribution system. Hence, optimal displacement, sizing, technology and installa
Abstract: Glucose based and alcohol based biofuels were produced from pretreated mango tree wood floor by enzymatic saccharification and fermentation. Two major components of plants, starch and cellulose, are both made up of sugars, the cellulose part of a plant is broken down to sugars and subsequently converted to ethanol. The acid